Xuanhua Jinke Drilling Machinery Co.,Ltd.
Xuanhua Jinke Drilling Machinery Co.,Ltd. Jinke provide users high quality drilling solutions,we always focus on the strategic conception of “Survival by quality, Development by credit’’.
Add to Cart
Introduction
JKCS300 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig, mainly used for water drilling, monitoring well, monitoring well,relif well, exploiting coal gas and other exploratory hole project.
JKCS300 truck mounted drilling rig, in rock drilling, DTH Hammer is applied in the operation, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
JKCS300 rotary water drilling rig, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under the effect of mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the water boring machine suitable for drilling complicated geological conditions.
Characteristics:
1. The drilling rig can use DTH Hammer drilling and mud drilling.
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3. The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
4.112kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
5. The rotary head, its rotation speed is 0-160rpm stepless adjustment and the rotary torque is 3400Nm.
6. With lifting force of 4T, rope length of 100m and 8m lifting height, the auxiliary winch is used for auxiliary lifting and casing.
7. Long strike hydraulic supporting leg can be use for transportation, loading and unloading of the drill automatically without the help of crane.
8. The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
9.The hydraulic pump driven by diesel engine, motor and mud pump, it make the drilling rig can working by mud drilling in soft formation.
10. Competitive in price, low cost of maintain.
Specification
|
1 |
Hole Diameter |
mm |
Φ105—Φ350 |
|
2 |
Hole Depth |
m |
300 |
|
3 |
Drill pipe diameter |
mm |
89,102,114 |
|
4 |
Drill pipe Length |
m |
3,4.5 |
|
5 |
Rotation Torque |
Nm |
4500 1st Gear |
|
8000 2nd Ger |
|||
|
6 |
Rotation Speed |
rpm |
0-80 1st Gear |
|
0-160 2nd Ger |
|||
|
7 |
Max. Lifting force |
N |
4000 |
|
8 |
Max. Feed Speed |
M/min |
18 |
|
9 |
Max. Lifting Height |
m |
8 |
|
10 |
Feed Stroke |
mm |
3400 |
|
11 |
Diesel Engine type |
CUMMINS |
|
|
12 |
Rated Horse power |
Kw |
112 |
|
13 |
Electrical System |
24 |
Volt |
|
14 |
Mud pump Volume of Flow |
L/Min |
200 |
|
15 |
Mud pump Rated Pressure |
Mpa |
1.6 |
|
16 |
Compressor Type |
Rotary Screw/Movable |
|
|
17 |
Compressor Pressure Required |
Mpa |
1.05—3.05 |
|
18 |
Air consumption |
m³/min |
16—35 |
|
19 |
Gradeability |
° |
15° |
|
20 |
Net Weight |
t |
8(not include truck) |
|
21 |
Shipping Length |
mm |
10600 |
|
22 |
Shipping Width |
mm |
2480 |
|
23 |
Shipping Height |
mm |
7147 |